Inserter 4 Type Fasteners at Once
InTouch Flexible Setup Process Control
625-4E 6 ton (57KN) ram force, 25 inch (650mm)throat depth,4 set MAS autofeed system
4 Station Automatic Upper Tool Changer
The upper tool adopts vacuum adsorption method to realize automatic tool replacement.
4 Upper Tool Library and 4 Feeding Device(total of 8 pre-programmed positions) can automatically feed up to 4 different sizes and types of fasteners in one process.Achieving a rate of 1 insertion every 2.5 seconds and tools changes in 3 seconds.
4 Station Automatic Lower Tool Changer
It consists of two parts, the Lower Tool Library and Handling Lower Manually Tool.Indexes and positions up to 4 different tools in the lower tool holder.
Ergonomics HMI
Operator control pendant adjustable in 2 directions.
Easier and Faster Programming
Install up to 4 different fasteners in 1 single part handing
The batch counter can single count & workpiece count
Each station can be configured to have its own dividual Force, Dwell Time and Fastener QTY
You can freely choose whether to use 4 stations, without forcing all to be used simultanenusy
The system will monitor the vacuum value in real time, if the air pressure is insufficient, the machine will issue a prompt alarm to prevent missing counting.
Fast & Easy Tooling Setup on 4 Set MAS Modular Autofeed Systems
Only one screw quick set up the automatic tool on the vibration bowl
Including high quality vibration bowl and intelligent digital variable voltage and variable frequency Piezoelectric vibration feeder controller
The Modular Autofeed System can feed nuts, studs and standoffs in the size M2 to M6. The maximum length of the studs and standoffs is 25mm
The vibration bowl adopts aluminum, which is more light and textured