6 Axes Full Electric Servo Press Brake
Using fully closed-loop servo control technology, the upper worktable position signal is fed back to the CNC system by two servo motors, and then the controller automatically calculates the target position of the worktable through linear interpolation. Control the position and speed at the same time to control the synchronous operation of the upper worktable and always maintain the parallel state with the lower worktable.
Main Features
2 programming modes
Direct programming and angular programming.Angle programming has automatic angle calculation function.
Backgauge
All-steel backgauge, higher positioning accuracy;
Using linear guide rails and large-lead ball screws, the peak positioning speed can reach up to 600㎜/s;
Multi-level stoppers with super large stroke range, the first stopper size is 500mm, and the second stopper size is 530mm;
Quick Clamp
The punch clamping mechanism adopts Amada type quick clamp
Technical Data
Model | EP-4013 |
Press Force | 400KN |
Bending Length | 1300mm |
Width Between Columns | 970mm |
Throat Depth | 400mm |
Max. Open Height | 420mm |
Slider Stroke | 120mm |
Main Motor Power | 7.5KW*2 |
Size | 1500*1500*2250mm |
Weight | 3500KG |