Availability: | |
---|---|
Quantity: | |
300WSSB
Inserter
300WSSB
The equipment is an automatic deburring machine composed of two sets of abrasive belt mechanisms and a set of planetary brush discs.
The sanding belt mechanism pre-grinds and removes the flanges on the product surface. Each set of brush discs contains three planetary brush discs. A single brush disc rotates, and the entire set revolves to achieve 360-degree deburring ofthe workpiece periphery and holes.
Surface brushing to remove burrs and scratches
Uniform chamfering around the workpiece and the inner hole
Equipped with imported fans or magnetic adsorption, it can meet the needs of small workpieces of 50*50mm
Automatic compensation function for disc brush abrasives
Automatic memory of process parameters when the machine is powered off
Abrasive reminder function
Optional cleaning and drying
Iron plates, copper plates, aluminum plates, stainless steel plates, etc.
Precision punching parts, powder metallurgy parts, stamped parts, precision deburring and polishing of workpieces with holes.
Working Width | 300/650/800/1050/1300mm |
Working Thickness | 0.5-100mm |
Conveyor Speed | 0.5-6m/min |
Abrasive Belt Speed | 14-20r/s |
Disc Brush Speed | 1450r/min |
Rate Voltage | AC 380/50HZ |
Pressure | 0.6-0.8MPA |
The equipment is an automatic deburring machine composed of two sets of abrasive belt mechanisms and a set of planetary brush discs.
The sanding belt mechanism pre-grinds and removes the flanges on the product surface. Each set of brush discs contains three planetary brush discs. A single brush disc rotates, and the entire set revolves to achieve 360-degree deburring ofthe workpiece periphery and holes.
Surface brushing to remove burrs and scratches
Uniform chamfering around the workpiece and the inner hole
Equipped with imported fans or magnetic adsorption, it can meet the needs of small workpieces of 50*50mm
Automatic compensation function for disc brush abrasives
Automatic memory of process parameters when the machine is powered off
Abrasive reminder function
Optional cleaning and drying
Iron plates, copper plates, aluminum plates, stainless steel plates, etc.
Precision punching parts, powder metallurgy parts, stamped parts, precision deburring and polishing of workpieces with holes.
Working Width | 300/650/800/1050/1300mm |
Working Thickness | 0.5-100mm |
Conveyor Speed | 0.5-6m/min |
Abrasive Belt Speed | 14-20r/s |
Disc Brush Speed | 1450r/min |
Rate Voltage | AC 380/50HZ |
Pressure | 0.6-0.8MPA |